Well Logging Tool Pressure Transducers Specifications

Available Pressure Ranges*
5000; 6000; 10,000; 15,000; 20,000; 30,000 psi

INSTALLATION

Honeywell Sensotec's standard "S" type transducers have straight threads and use an O-ring for pressure sealing. To get the best seal with the O-ring on the transducer, the tapped hole should have the dimensions shown below. For normal operating temperatures (-65° F to +250° F) use BUNA-N (black) O-rings. For high temperatures (250° F to 425° F) use silicone rubber (red).

O-Ring-#12

Max. Torque (For 17-4 PH only) 500 In-lbs.

PERFORMANCE

Pressure Ranges

5000; 6000; 10,000; 15,000; 20,000; 30,000 psi

Non-Linearity and Hysteresis (max)

1.0% F.S.

Non-repeatability (max)

+ /-0.1% F.S.

Output (standard)

2mV/V

Resolution

Infinite

ENVIRONMENTAL

Temperature, Operating

-65° to 400° F (-54° to 204° C)

Temperature, Compensated

70° to 400° F (21° to 204° C)

Temperature Effect on Zero (max)

.01% F.S./ ° F (0.018% F.S./ ° C)

Temperature Effect on Span (max)

.02% Rdg./ ° F (0.036% Rdg./ ° C)

ELECTRICAL

Strain gauge Type

Bonded foil

Excitation (calibration)

5VDC

Bridge Resistance

350 ohms

Wiring Code (std)

Electrical Termination (std)

4 twisted leads (5 ft.)

MECHANICAL

Media

Gas, Liquid

Overload-Safe

50% over capacity

Wetted Parts Material

17-4 PH Stainless

Type

gauge

Case Material

17-4 PH Stainless