|
| PERFORMANCE |
Accuracy |
±0.2%
BFSL |
| |
Repeatability |
0.1% Full
Scale Output |
|
| ENVIRONMENTAL |
Temperature,
Operating |
-45ºF
to +200ºF (-43ºC to +93ºC) |
| |
Temperature,
Compensated |
-30ºF
to +180ºF (-35ºC to +80ºC) |
| |
Temperature
Effect on Zero |
< 0.01%
F.S./ºF (<0.018% F.S./ºC) |
| |
Temperature
Effect on Span |
< 0.01%
Rdg/ºF (<0.018% Rdg/ºC) |
|
| ELECTRICAL |
Supply Voltage |
9-28 Volts
DC |
| |
Output (Standard) |
4-20mA (2-Wire)
Full Scale |
| |
Insulation
Resistance |
> 100
Megaohms at 50 VDC |
| |
Maximum
Loop Resistance |
950 Ohms
at 28 Volts Decreasing Linearly to 0 Ohms at 9 Volts |
| |
Circuit
Protection |
Reverse
Polarity Protection of Supply Leads |
| |
RFI/EMI
Protection |
Noise Immunity
from 500 Hz to 1.0 GHz |
| |
Electrical
Connection (standard) |
MS-3102E-14S-2P,
4-Pin Stainless Steel Hermetic |
| |
Frequency
Response |
Customer
Specified and Factory Installed Filter for Frequency
Response of Min. 10 Hz to Max of 2500 Hz (1.5 x 1.0
Sec.) |
| |
"Zero"
and "Span" Adjustment |
Field Adjustable
by removing connector |
| |
CE Marked |
Yes |
|
| MECHANICAL |
Pressure
Ranges |
0-5000 psi;
0-6000 psi; 0-10,000 psi; 0-15,000 psi; 0-20,000 psi |
| |
Safe Overpressure |
1.5 Times
Rated Full Scale Pressure or Limit of the WECO 1502
Fitting |
| |
Burst Pressure |
2.5 Times
Rated Pressure or Limit of WECO Fitting |
| |
Pressure
Fitting |
®WECO
1502/2202 Wing Union, 2" Pipe, Male Sub End |
| |
Wetted Parts,
Material |
Inconel
X-750 |
|
| AMPLIFIER CERTIFICATIONS |
CSA Approved |
CLASS 1,
Div 1, GRP ABCED
CLASS 1, ZONE 0, GRP IIC
Exia
Install per 001-07999-02
Tamb = 85º C
NRTL/C
Intrinsically Safe |
| |
CENELEC
Approved |
LCIE 98.E
6047 X
Eex ia IIC T5
-40º < Ta < 93ºC |
| |
FM Approved
Intrinsically Safe |
Class I,
II, III, Div 1
Groups ABCDEFG
Tamb = 85º C |
|
| PHYSICAL |
Connector/Mating
Connector |
NEMA 4x |
| |
Weight |
6 pounds |
| |
Labels |
Welded Stainless
Steel with Embossed Characters and
Large Mylar Range Label
Serial Number Scribed into Housing for Permanent ID |
|
| OPTIONS |
Mechanical
Connector Guard |
Stainless
Steel |
| |
Carrying
Handles |
Consult
Factory to Select from the Variety of Handles |
| |
Frequency
Response Filter |
Customer
Specified and Factory Installed Filter for Frequency
Response of Min. 10 Hz to Max of 2500 H (1.4 x 10
(Mil sec.) |
| |
Shunt Calibration |
Buffered
Remote Activated with Optical Isolator Available.
(Intrinsically Safe Approval is Pending) |
| |
DNV Approval |
Available |
| |
Customer-specific
Wiring Codes and Electrical Connectors |
Available,
Consult Factory |
| |
|
|
Wing Union Pressure Transmitters 