Honeywell Sensing and Control is one of the world's largest single source suppliers
of sensors and switches.
Advantage
Page for:
- Product Manuals
- Product Drawings
- Configurators
- Software
- and much more!
|
|
Transducer Indicator/Conditioner
(Models SC1000, SC2000, SC2001, SC3004)
The SC series of self-calibrating microprocessor-based
Transducer Signal Conditioner/Indicators are available
with several different types of chassis, input channels,
and output channels. When used with unamplified strain-gauge
transducers that have the Honeywell Sensotec Signature Calibration
Module installed, these instruments will completely self
calibrate zero, span, linearity, decimal point, and engineering
units automatically. |
Input channels are available for a variety of transducers. Each
input channel includes an excitation
power supply and either an isolated voltage or isolated current analog
output.
• Unamplified pressure or load
• Pressure or load with internal voltage or current amplifiers
• AC/AC LVDT
• DC/DC LVDT
•Pt100 type RTDs
Available Output channels for the Models SC2000 and SC3004 only
include:
• Contact relays for the 4 standard limits or an additional 4 limits
(max. 16 limits/chassis)
• Isolated digital-to-analog voltage (+/-5 or +/-10VDC) or current (4-20mA)
In addition to the physical input and output channels, up to 8 Virtual
channels can be configured to assist in many applications:
• Summation for weighing
• Floating-point mathematics
• Split-screen display
• Conditional programs
• Timer applications
Firm ware programs have been developed for
many applications:
Summation for weighing |
Dual/multiple scaling of transducers |
Sum and Difference |
Logarithmic functions |
Peak detector enabled...windowed |
Two way digital communications |
peak for SPC applications |
for control functions |
Pressure decay leak testing |
Remote on/off tare |
Peak/clear... level triggered |
Remote on peak reset |
Peak/clear... edge triggered |
Control programs (special) |
Good/bad (Go/NoGo) indications |
Conditional programs |
Tank geometry linearization for level |
Timer applications |
Averaging |
Square-root calculations |
Track/Hold |
RS-485 communications |
What is Signature Calibration.
Downloads
Instruction Manual
Communications Guide
Data Sheet
Programming Samples
QBASIC
LABVIEW
C/C++ WIN 32 Source Code
You will need Acrobat
Reader to view the data sheets in PDF format.
|
