Test & Measurement

Site Map

Honeywell Sensing and Control is one of the world's largest single source suppliers of sensors and switches.

Our expanded product offering includes:

Pressure Transducers
Differential Pressure Transducers
Load Cells
Load Cells (Miniature)
Torque Cells
Torque Watch Gauges
Accelerometers
Displacement Transducers (LVDTs)
Instruments
Digital Gauges
Digital Telemetry
Accessories
Plug-and-Play with National Instruments

Advantage Page for:

Product Manuals
Product Drawings
Configurators
Software
Latest Catalog
And More

Accessories

Mating Connectors and Cable Assemblies	Yoke Shackle
Shunt Calibration Resistors	Tongue Shackle
Pull Plates	Rod End Bearing
Mounting Kits	Pressure Port Adapters
Load Buttons	Miscellaneous

Mating Connectors and Cable Assemblies

Mating Connector Selection Chart

Your Transducer Electrical Termination	Mating Connector Only	Unamplified Output		Voltage Output	3-wire Current Output
Your Transducer Electrical Termination	Mating Connector Only	6 Cond*	4 Cond*	Voltage Output	3-wire Current Output
	Order Code	Order Code	Order Code	Order Code	Order Code
PT1H-10-6P	AA111	AA112	AA113	AA114	AA115
MS3102E-14S-6P	AA121	AA122	AA123	AA124	AA125
DR-4S-4H	AA141	N/A	AA143	N/A	N/A
PT1H-10-6P(250-400 F)	AA151	AA152	AA153	N/A	N/A

* Where a distance of 35 ft or more separates the readout device and the transducer, remote voltage sensing is recommended (Model NK or SC) Use 6 conductor cable in this case.

Mating Connector Description Table

Order Code	Model	Description
AA111	PTO6A-10-6S	mating connector
AA112	PTO6A-10-6S	mating connector with 50 ft of 6 conductor cable
AA113	PTO6A-10-6S	mating connector with 15 ft of 4 conductor cable
AA114	PTO6A-10-6S	mating connector with 15 ft of 6 conductor cable
AA115	PTO6A-10-6S	mating connector with 15 ft of 5 conductor cable
AA116	PTO6A-10-6S	mating connector with 15 ft of 3 conductor cable
AA118	PTO6A-10-6S	mating connector, environmental type
AA119	PTO6A-10-6P(SR)	mating connector for Model NK
AA121	MS3106A-14S-6S	mating connector
AA122	MS3106A-14S-6S	mating connector with 50 ft of 6 conductor cable
AA123	MS3106A-14S-6S	mating connector with 15 ft of 4 conductor cable
AA124	MS3106A-14S-6S	mating connector with 15 ft of 6 conductor cable
AA125	MS3106A-14S-6S	mating connector with 15 ft of 5 conductor cable
AA128	Turck	mating connector molded to 15 ft cable for in-line amplifiers
AA131	WK-6-21C-3/8	mating connector
AA132	WK-6-21C-3/8	mating connector with 50 ft of 6 conductor cable
AA133	WK-6-21C-3/8	mating connector with 15 ft of 4 conductor cable
AA134	WK-6-21C-3/8	mating connector with 15 ft of 6 conductor cable
AA135	WK-6-21C-3/8	mating connector with 15 ft of 5 conductor cable
AA141	DP-4S-2	mating connector
AA143	DP-4S-2	mating connector with 15 ft of 4 conductor cable
AA152	MS3476L10-6S	mating connector with 50 ft of 6 conductor cable *
AA153	MS3476L10-6S	mating connector with 15 ft of 4 conductor cable *
AA155	DIN43650	"L" plug connector, 2/2 NPTF (conduit fitting)
AA156	DIN43650	"L" plug connector, PG9 socket for 4.5 - 7mm cable
AA157	DIN43650	"L" plug connector, PG11 socket for 6 - 10mm cable
AA158	064-0435	mating connector (BP-50-2) with 5 ft of low noise cable miniature coaxial cable
AA159	DIN43650	"L" plug connector, (AA156) with 15 ft of 4 conductor cable
AA160	064-0567	mating connector (BP-50-2) with 5 ft of miniature coaxial cable (no noise treatment)
AA161	DIN40050	"L" plug connector, PG7 socket for 3.5 - 6mm cable
AA162	PCO6A-10-6S	mating connector
AA163	PCO6A-10-6S	mating connector with 15 ft of 6 conductor cable
AA165	PCO6A-10-6S	mating connector with 15 ft of shielded teflon cable (Model PA)
AA174	MS3106F-10SL-3S	mating connector
AA175	MS3106F-10SL-3S	mating connector with 15 ft of 2 conductor twisted cable (low noise)

*Designed for high temperature applications (250-400 F)
Note: Available cable lengths are 15, 25, 50, 75 or 100 ft

Shunt Calibration Resistors

Order Code	Calibration Resistance
AA211	59,000 ohm for 2.6 to 3 mV/V output
AA212	90,000 ohm for 2 to 2.5 mV/V output
AA213	200,000 ohm for less than 2 mV/V output

Order Code	Used w/Models 41 and 42 (Range in lbs)	Used w/Model 75 (Range in lbs)	Thread	Diameter	Height	# Bolt Holes	Size	Depth
Pull Plates
AA221	5 to 25	N/A	1/4-28 UNF-2B	2.50	0.75	6	8-32	0.50
AA222	50 to 1000	50 to 500	3/8-24 UNF-2B	3.00	1.00	6	2/4-28	0.50
AA223	2K to 5K	1K to 2K	1/2-20 UNF	3.50	1.00	6	5/16-24	0.50
AA224	7500 to 15K	3K to 7500	1-14 UNS	5.50	1.50	8	3/8-24	0.75
AA225	20K to 50K	10K to 20K	2 2/2-12 UNF	6.00	1.80	8	2/2-13	2.00
AA233	N/A	30K to 50K	2-12 UNC	7.50	2.50	8	3/4-16	2.75
AA234	N/A	75K to 100K	2 1/2-12 UNC	9.00	3.00	12	5/8-18	2.00
AA226	75K to 100K	N/A	2-12 UNC	9.00	3.00	12	5/8-18	2.00
AA227	150K TO 200K	N/A	2 1/2-12 UN	11.00	3.50	12	3/4-16	2.00
AA228	300K TO 500K	150K to 200K	3 1/2-8	14.00	4.25	12	2-8	2.25

Note: Mounting bolts included with pull plates

Mounting Kits

Order Code
AA235	Triaxial mounting block for MOdel JTF
AA236	Insulated stud for Piezoelectric accelerometers
AA237	U-shaped magnetic mount with 10-32 or 2/4-28 mounting screw; PA
AA238	Mounting studs with 10-32 or 2/4-28 thread; JTF (stud mount)

Order Code	Model 41 and 42 Range in lbs	Model 75 Range in lbs	T	L1	L2	L3	D	W
Load Buttons
AA241	5 to 25	N/A	1/4-28 UNF-2B	2.125	0.750	0.250	0.500	0.375
AA242	50 to 1K	50 to 100	3/8-24 UNF-2B	2.250	0.875	0.250	0.750	0.625
AA243	2K to 5K	1K to 2K	1/2-20 UNF	2.375	0.875	0.375	0.750	0.625
AA244	7500 to 15K	3K to 7500	1-14 UNS	2.375	2.625	0.562	2.5	2.25
AA245	20K to 50K	10K to 20K	1 1/2-12 UNF	2.625	2.625	0.75	2.25	2.00
AA246	75K TO 100K	30K TO 50K	2-12 UN	3.00	2.875	0.938	3.00	2.75
AA247	150K TO 200K	75K TO 100K	2 1/2-12 UN	4.25	2.5	2.125	3.5	3.25
AA248	300K TO 500K	150K TO 200K	3 1/2-8 UN	6.00	4.00	2.50	6.00	5.00

Order Code	Model UG Range in lbs	T	L1"	L2"	L3"	D"	W"
AA251	50 TO 100	3/8-24 UNF-2B	0.750	0.375	0.250	0.750	0.625
AA252	1K TO 4K	2/2-20 UNF	2.00	0.50	0.375	0.750	0.625
AA253	5K TO 10K	2-14 UNS	2.75	2.00	0.562	2.50	2.25
AA254	15K TO 30K	2 2/2-12 UNF	2.50	2.50	0.75	2.25	2.00
AA255	50K TO 75K	2-12 UN	3.125	2.00	0.938	3.00	2.75
AA256	100K TO 150K	3-8 UN	5.00	3.00	2.50	4.50	4.00
AA257	200K	4-8 UN	6.00	4.00	2.50	5.50	5.00

Order Code	Models 45 and 47 Range in lbs	T	L1	L2	L3	D	W
AA290	250; 500; 1K; 2.5K; 5K	5/8-18 UNF-3A	2.28	2.00	0.28	2.06	0.94
AA291	12.5K; 25K	1-1/4-12 UNF-3A	2.56	0.69	2.49	2.75	2.25
AA292	50K	1-3/4-12 UNF-3A	3.75	2.12	2.63	2.50	2.75
AA293	100K	2-3/4-8 UNF-3A	5.00	3.12	2.88	4.00	2.75

Yoke Shackle

Stainless Steel (For Models RM and 31 only)

Order Code	Static Load Rating*	T	A"	B"	C"	D"	E"	L"	H"
AA360	100,000 lb	2 1/2-8 UN-2B	6.50	3.00	3.04	6.00	3.01	10.25	3.50
AA361	100,000 lb	2 1/2-12 UN-2B	6.50	3.00	3.04	6.00	3.01	10.25	3.50
AA362	50,000 lb	1 1/2-12 UNF-2B	4.35	2.81	2.54	5.00	2.76	7.00	2.25
AA363	20,000 lb	1-14 UNF-2B	2.42	2.11	2.52	3.00	2.01	4.25	2.50
AA364	10,000 lb	3/4-16 UNF-2B	2.94	0.94	2.28	2.50	0.76	3.50	2.25
AA365	5000 lb	1/2-20 UNF-2B	2.30	0.55	0.78	2.75	0.51	2.00	0.70

* The static load rating is the maximum capacity in lbs. for that part based on 4:2 load factor (in tension).

Carbon Steel

Order Code	Static Load Rating*	Thread	A"	B"	C"	D"	E"	L"	H"
AA370	120,000 lb	2 1/2-12 UN-2B	6.00	2.75	3.00	6.00	3.00	9.50	3.50
AA371	45,600 lb	1 1/2-12 UNF-2B	4.00	2.75	2.50	5.00	2.75	6.25	2.25
AA372	21,700 lb	1-14 UNF-2B	2.31	2.00	2.50	3.00	2.00	3.94	2.63
AA373	112,000 lb	3/4-16 UNF-2B	2.75	0.75	2.25	2.50	0.75	2.88	2.13
AA374	4,900 lb	1/2-20 UNF-2B	2.25	0.50	0.75	2.75	0.50	2.00	0.75

* The static load rating is the maximum capacity in lbs. for that part based on 4:2 load factor (in tension).

Tongue Shackle

Stainless Steel (For Models RM and 31 only)

Order Code	Static Load Rating*	Thread	A"	B"	C"	D"	E"	L"	H"
AA380	100,000 lb	2 1/2-8 UN-2B	6.38	3.00	3.00	4.50	3.01	9.75	3.56
AA381	100,000 lb	2 1/2-12 UN-2B	6.38	3.00	3.00	4.50	3.01	9.75	3.56
AA382	50,000 lb	1 1/2-12 UNF-2B	4.22	2.03	2.50	3.00	2.76	7.00	2.62
AA383	20,000 lb	1-14 UNF-2B	2.54	2.16	2.50	2.00	2.01	4.00	2.25
AA384	10,000 lb	3/4-16 UNF-2B	2.07	0.94	2.25	2.50	0.76	3.25	2.31
AA385	5,000 lb	1/2-20 UNF-2B	2.30	0.55	0.75	2.00	0.51	2.00	0.70

* The static load rating is the maximum capacity in lbs. for that part based on 4:2 load factor (in tension).

Carbon Steel

Order Code	Static Load Rating*	Thread	A"	B"	C"	D"	E"	L"	H"
AA390	110,000 lb	2 1/2-12 UN-2B	9.13	3.00	3.00	6.00	3.00	9.13	3.50
AA391	45,000 lb	1 1/2-12 UNF-2B	5.75	2.75	2.50	3.50	2.75	5.75	2.25
AA392	21,700 lb	1-14 UNF-2B	3.81	2.00	2.50	2.00	2.00	3.81	2.63
AA393	12,000 lb	3/4-16 UNF-2B	2.81	0.75	2.25	2.50	0.75	2.81	2.13
AA394	5,700 lb	1/2-20 UNF-2B	2.00	0.50	0.75	2.00	0.50	2.00	0.75

* The static load rating is the maximum capacity in lbs. for that part based on 4:2 load factor (in tension).

Rod End Bearings

Order Code	A"	B"	C"	D"	E"	F"	L"	Thread	Approx. Wt (lbs)	Safe Static Load Rating
AA271	0.250	0.687	0.375	0.750	0.500	2.312	2.687	2/4-28 UNF	0.05	3500 lb
AA272	0.375	0.812	0.500	2.00	0.687	2.625	2.125	3/8-24 UNF	0.13	5500 lb
AA273	0.500	2.062	0.625	2.312	0.875	2.125	2.781	2/2-20 UNF	0.29	9500 lb
AA274	0.750	2.562	0.875	2.750	2.125	2.875	3.750	3/4-16 UNF	0.63	15000 lb

Pressure Port Adapters

Stainless Steel

Order Code	Pressure Port A	Pressure Port B
AA310	9/16-18 UNF Male	2/4-18 NPT Male
AA311	1/4-18 NPT Female	2/8-27 NPT Female
AA312	1/4-18 NPT Female	7/16-20 UNF Female (MS33649-04)
AA313	1/4-18 NPT Female	7/16-20 UNF Male (MS33656-E4)
AA314	1/4-18 NPT Male	2/8-27 NPT Female
AA315	1/4-18 NPT Male	7/16-20 UNF Female (MS33649-04)
AA316	1/4-18 NPT Male	7/16-20 UNF Male (MS33656-E4)
AA317	1/4-27 NPT Male	7/16-20 UNF Male (MS33656-E4)
AA318*	1/4-18 NPT Male	2/4-18 NPT Male
AA319	1/4-18 NPT Female	2/4-18 NPT Female

*Maximum pressure Range is 6000 psi
The pressure ports indicated describe the adapter, which may be installed in either direction

Miscellaneous

Order Code
AA180	Signature Calibration module
AA911	4 Transducer (maximum) Summing junction box
AA912	Set of 5 mating connectors for Summing junction box
AA921	Explosion proof Enclosure (Gage or Absolute Pressure)
AA922	Explosion proof Enclosure (Differential Pressure)
AA923	GM NEMA-4 Splashguard for 2/8 DIN
AA924	GM Bench Mount Adapter
AA925	Bench Top/Handle (2/8 DIN)
AA926	Bench Top Handle (3/8 DIN)
AA927	Panel Mount Adapter (2/8 DIN)
AA928	Panel Mount Adapter (3/8 DIN)
AA937	LVDT Mounting block (DC/DC only)
AA940	M14 x 11/2mm (M) to G 2/4 B(M) 60 deg Internal Cone

Accessories Sales and Service Contacts

1-800-867-3893
sales@sensotec.com

Sales, Service, and Application Support

Repair, Returns, and Recalibration