Detailed information |
Honeywell Sensotec's Model 31
Precision Miniature load cells measure both tension and compression load
forces of 50 grams to 10,000 lbs. Model 31's welded, stainless steel construction
utilizes a "tripled" stack effects of off-axis loads. The Model 31 tension
compression load cell has male threads attachments. High accuracies of 0.15-0.25%
full scale are achieved. Each bonded strain gauge unit is built of welded
17-4 PH stainless steel for additional ruggedness. All load cells that have
ranges below 10lbs. have a small electrical zero balance circuit board which
is in the lead wire (approximately 1"x .087" thick).
More information... |
Honeywell Sensotec's Model 34
The Model 31 tension/compression load cell is a Model 31 load cell with
female threaded load attachments.
More information...
|
Honeywell Sensotec model 11
The Model 11 (tension/compression) subminiature load cell is designed to
measure load ranges from 150 grams to 1000 lbs. With subminiature dimensions,
including diameters from .50" to 0.75" and height of 0.38",
these units are easily incorporated into systems having limited space. The
model achieves a combined non-linearity and hysteresis of 0.5% full scale
and a frequency response of up to 58 kHz. A small circuit board is included
in the load cell’s lead wire cable for zero balance.
More information...
|
Honeywell Sensotec Model 53
The Model 53 load cells are bonded foil strain gauge transducers designed
for low cost production and testing applications and engineered compression
force measurements up to 50,000 lbs., The model 53 achieves a maximum non-linearity
of 0.25% full scale. Precision gaging techniques and a stainless steel construction
provides excellent long term stability and reliability under severe operating
conditions. The Model 53 compression-only load cell has an integral load
button machined as part of the load cell. Three tapped holes are provided
for mounting.
More information...
|
Honeywell Sensotec Model 13
Honeywell Sensotec's Model 13 (compression only) Subminiature Load Cell is designed
to measure load ranges from 150 grams to 1000 lbs. With subminiature dimensions,
including diameters from .38" to 0.75" and heights of .13" to 0.25", these
units are easily incorporated into systems having limited space. Model 13
combines high frequency response and low deflection to achieve a combined
non-linearity and hysteresis of 0.25%-0.5% full scale. A small circuit board
is included in the load cell's lead wire cable for temperature compensation.
More information...
|
Honeywell Sensotec Model D
Honeywell Sensotec's Model D Donut Shaped Load Cell features a smooth thru-hole design
perfect for applications which require the load structure to pass directly
through the cell. Such applications include bolt force measurements, clamping
forces, and monitoring overloads. Load ranges as low as 150 grams and as
great as 30,000 pounds can be measured within a maximum full scale non-linearity
and hysteresis of ±0.5% F.S. These models are used in compression applications
and are available in multiple hole sizes.
More information...
|
Honeywell Sensotec Model LFH-7I
Honeywell Sensotec's Model LFH-7I Subminiature Load Cell is a low profile force transducer
for applications with minimal space and high capacity requirements. This
transducer utilizes foil strain gauges to measure compression loads of up
to 10,000 lbs. and achieves non-linearity and hysteresis of +/- 0.7% full
scale.
More information...
|
| Back |
