Torque Watch Gauge Series

In today's competitive environment, technology is shrinking components and systems smaller and smaller. At the same time, tolerances are becoming tighter and tighter. For those committed to quality, precision is the watchword. That's why professionals today turn to Torque Watch, as they have for the last fifty years.

The Torque Watch is simple to use, requiring no special tools or setups. Attach the gauge to the device being measured, and simply rotate it, for a direct reading on the clear, easy-to-read dial. There's even protection against over-torque, by a stainless steel internal rotation stop.

Honeywell also has a full recalibration program available. Just return your Torque Watch, and we'll service and recalibrate it, in a system that is traceable to the National Institute of Standards and Technology (NIST).

The Series 366 Torque Watch accurately measures very low torque, in values that range form 0.003 to 0.60 oz/in. Three miniature adapter chucks allow simple coupling to the device being measured.

To minimize friction, a calibrated helical spring, shaft, and pointer assembly are mounted in jeweled bearings. The unit can measure torque in either a clockwise or counterclockwise direction. A stainless steel internal rotation stop prevents damage from over-torque up to three times the normal range.

Download Data Sheet

Choose from nine models that measure torque in the ranges specified in the chart below.

The Series 651 Torque Watch provides accurate measurements of low static torque in values that range form 0.05 to 40.0 oz/in. A 1/4 inch keyed chuck provides a simple means of coupling to the device under measurement.

The Series 651 utilizes a calibrated spring, shaft, and pointer assembly within a rugged steel and aluminum housing. The unit can measure torque in either a clockwise or counterclockwise direction. Internal stainless steel rotation stops prevent damage from over-torque up to two times the normal range.

Download Data Sheet

Eighteen models are available in the ranges specified below. Models are also available with metric and S.I. units of measure.

The Series 940 Torque Watch accurately measures torque in values that range form 15.0 to 200 oz/in. A 3/8 inch keyed chuck and 3/8 inch square socket driver adapter provides simple means of coupling to the device under measurement.

The Series 940 utilizes a calibrated spring, shaft, and pointer assembly within a rugged steel and aluminum housing. The unit can measure torque in either a clockwise or counterclockwise direction. Internal stainless steel rotation stops prevent damage from over-torque up to two times the normal range.

Download Data Sheet

Six models are available in the ranges specified below.